General fabrication
Review brackets, profiles and nested sheet components against the material grade, drawing and required edge condition.
FY-LCM01-OSOne cutting table.
One cutting table.
Room to load your sheet.
A floor-standing single-table fiber laser platform for prototypes, short runs and general sheet-metal fabrication. Match the working area, laser package and loading space to the parts your workshop actually makes.
FormatFloor-standing single table
Reference area1500 x 3000 mm
LoadingAccessible sheet worktable
LCM01-OS
Product visualization based on the FYXFER catalogue reference.
01 / FY-LCM01-OS
Machine & details
Confirm the final equipment and configuration in the quotation.
Signage and prototypes
Plan metal letters, decorative profiles and short runs around the smallest feature and any finishing needed.
Equipment and furniture
Evaluate stainless-steel panels, fittings and related components using representative parts and an agreed sample result.
02 / Selection guide
Choose around your application
Match the equipment to the material, part and production workflow.
SHEET & SPACE
A desktop name, a floor-standing machine.
Start with the sheet you buy and the route used to load it. The documented table is not a benchtop unit; its usable area and the surrounding handling space are different dimensions.
- Normal sheet size and largest part
- Sheet weight and loading route
- Operator and maintenance access
Will it fit a small workshop?
Discuss my application ↗Send a floor plan and loading method. Check the complete installation footprint, not only the reference cutting area.
Product visualization based on the FYXFER catalogue reference.
MATERIAL & EDGE
Let the required part define the process.
Share the exact alloy, coating and usual thickness before choosing power. Hole geometry, edge finish and assist gas affect the proposed process; reflective metals require a compatible source and review.
- Material grade and thickness range
- Drawing with critical features
- Accepted edge finish and sample
Should I select the highest power?
Discuss my application ↗Choose the complete source, head, cooling and gas package against the job. Listed power options are not a universal cutting-capacity chart.
FY-LCM01-OS · Machine layout Illustrated layout; component appearance follows the quoted configuration. Open full-size image ↗
SUPPLY SCOPE
Make the workshop package explicit.
Agree the equipment and site responsibilities before comparing quotations. An exchange table, enclosure, extraction system or compressor changes the layout and is not automatically included with the single-table platform.
- Itemised machine and option list
- Electricity, gas and cooling needs
- Loading, extraction and guarding plan
How should output be compared?
Discuss my application ↗Use the same representative drawing and include loading, cutting, unloading and finishing. Maximum travel speed alone does not predict completed parts.
FY-LCM01-OS · Process concept Conceptual process illustration, not a cutting-test sample or operating procedure. Open full-size image ↗
03 / Configuration
Configuration & supply scope
Confirm the final equipment and configuration in the quotation.
| Machine platform | FY-LCM01-OS; single-table fiber laser with welded steel bed. |
|---|---|
| Listed laser powers | 1.2 / 1.5 / 2 / 3 / 6 / 12 / 20 kW; configuration review required. |
| Working area | 1500 x 3000 mm reference; other sizes on request. |
| Source and head | Raycus / MAX; Raytools / Empower, according to the selected configuration. |
| CNC control | XC3000S or application-matched control package. |
| Motion components | Delta / Panasonic servo options; guides, rack and reducer confirmed together. |
| Cooling | Hanli or specified matching water chiller. |
| Assist gas | Nitrogen, oxygen or prepared compressed air, according to process. |
| Electrical reference | 380 V, three-phase, 50 Hz; destination supply and connected load require confirmation. |
| Options and performance | Exchange table, enclosure and extraction quoted separately; speed, accuracy and thickness depend on the agreed configuration. |
More published configuration details
Technical Specifications
These are configuration references, not one universal specification. Laser power, bed size, components and utilities must be matched in the final proposal. Exact speed, accuracy, weight and shipping dimensions are confirmed for the selected machine.
| Machine Model | FY-LCM01-OS |
|---|---|
| Laser Type | Fiber laser |
| Available Laser Power | 1.2 / 1.5 / 2 / 3 / 6 / 12 / 20 kW; configuration review required |
| Laser Source | Raycus / MAX, according to configuration |
| Working Area | 1500 × 3000 mm reference; other sizes on request |
| X / Y Axis Travel | Confirmed in the final configuration |
| Positioning Accuracy | Defined by bed size, drive system and acceptance conditions |
| Repeat Positioning Accuracy | Defined by bed size, drive system and acceptance conditions |
| Maximum Travel Speed | Defined by bed size, drive system and acceptance conditions |
| Maximum Acceleration | Confirmed in the final configuration |
| Cutting Thickness | Depends on power, material and cutting process |
| Cutting Materials | Suitable metals after material and process review |
| Laser Cutting Head | Raytools / Empower, according to configuration |
| CNC Control System | XC3000S or application-matched control package |
| Servo Motor | Delta / Panasonic options; matched to the drive system |
| Linear Guide Rail | Confirmed in the final configuration |
| Rack & Pinion | Confirmed in the final configuration |
| Reducer | Confirmed in the final configuration |
| Water Chiller | Hanli or specified matching configuration |
| Assist Gas | Nitrogen, oxygen or prepared compressed air, according to process |
| Electrical Supply | 380 V, 3-phase, 50 Hz reference; destination supply to be confirmed |
| Total Connected Load | Confirmed in the final configuration |
| Machine Dimensions | Confirmed in the final configuration |
| Packing Dimensions | Confirmed in the final configuration |
| Net Weight | Confirmed in the final configuration |
| Gross Weight | Confirmed in the final configuration |
| Machine Bed | Welded steel structure; layout depends on selected working area |
Related equipment
Compare the formats
04 / Downloads
Planning resources
Download the fiber laser cutting selection guideEnglish document · 91 KB↓Before you enquire
Is this a small benchtop cutter?+
No. It is a floor-standing single-table machine; the documented working-area reference is 1500 x 3000 mm.
Can it process aluminium or brass?+
Submit the alloy and thickness for compatible-source and process review; suitability is not established by the metal name alone.
Are installation and training included?+
Confirm installation guidance, training, utilities and support responsibilities in the agreed supply scope.
05 / Discuss my application
Tell us what you need.
Send your sheet dimensions, material grades, thicknesses and a representative drawing. Mention FY-LCM01-OS and describe the loading space and finish you need.
Selected machineFY-LCM01-OS
FY-LCM01-OS
Tell us what you need.
Continue on our contact page to share your application and request a configuration.
Discuss my application ↗