Access-led fabrication
Consider the format where sheet handling and operating access need to be assessed alongside local protective panels.
FY-LCM01Keep the access you need.
Keep the access you need.
Review the enclosure around it.
A project-specific FY-LCM01 arrangement combining partial protective panels with planned sheet access. Review the cutting process, guarding, extraction and loading method together before confirming the final design and supply availability.
FormatCustom partial enclosure
PlatformFY-LCM01 family
AvailabilityEngineering confirmation required
LCM01
Configuration visualization; final enclosure design subject to engineering review
01 / FY-LCM01
Machine & details
Confirm the final equipment and configuration in the quotation.
Workshop layout projects
Compare open, semi-enclosed and fully enclosed arrangements against the available floor space and extraction plan.
Configuration-led metal work
Review suitable metals, thicknesses and part drawings before specifying power, components or panel geometry.
02 / Selection guide
Choose around your application
Match the equipment to the material, part and production workflow.
ACCESS & PANELS
Define the openings your workflow needs.
Show how sheets enter, finished parts leave and maintenance is performed. Panel locations and heights follow that access concept; they should not be selected independently of the loading method and cutting task.
- Sheet size and handling method
- Operator and service access points
- Panel and opening constraints
Is this a fixed standard model?
Discuss my application ↗It is a custom FY-LCM01-family configuration, subject to engineering and availability review. The final model designation is confirmed with the agreed enclosure and equipment package.
Configuration visualization; final enclosure design subject to engineering review
PROTECTION & EXTRACTION
Treat the installation as a whole.
Partial panels do not establish a fully enclosed laser-safe system. Review the remaining openings, access control and fume-capture arrangement together, using the actual process and destination requirements to define the installation.
- Required access during operation
- Extraction capture and duct layout
- Site protection and compliance needs
Will panels remove the fumes?
Discuss my application ↗No. Extraction airflow, capture points and filtration need their own design review; the presence of panels does not prove effective fume removal.
Confirm the final equipment and configuration in the quotation.
PROCESS & QUOTATION
Compare the complete alternatives.
Start with material, thickness, drawing and required finish. Compare the proposed semi-enclosed design with open and fully enclosed alternatives using the same process, utilities and included equipment, rather than enclosure appearance alone.
- Material and accepted sample result
- Source, head and motion package
- Itemised installation and equipment scope
Can a power option be selected now?
Discuss my application ↗Power follows the enclosure and process review. Do not assume that a power or bed size listed for another FY-LCM01 variant applies here.
Confirm the final equipment and configuration in the quotation.
03 / Configuration
Configuration & supply scope
Confirm the final equipment and configuration in the quotation.
| Model designation | FY-LCM01 family; final custom designation and availability require engineering confirmation. |
|---|---|
| Machine format | Partially enclosed fiber laser configuration with project-defined access. |
| Machine bed | Welded steel structure; selected working area determines the layout. |
| Working area | Configured for the application; no fixed size established. |
| Laser source and power | Selected after enclosure and material/process review. |
| Head, control and motion | Final component package to be confirmed; no standard brands assigned here. |
| Assist gas | Nitrogen, oxygen or prepared compressed air, according to the approved process. |
| Cooling and electricity | Matched chiller, supply and connected load confirmed for the ordered configuration. |
| Guarding and extraction | Panel design, access measures and extraction specified for the complete installation. |
| Performance and footprint | Thickness, speed, accuracy, dimensions and weight confirmed against the selected configuration. |
More published configuration details
Technical Specifications
These are configuration references, not one universal specification. Laser power, bed size, components and utilities must be matched in the final proposal. Exact speed, accuracy, weight and shipping dimensions are confirmed for the selected machine.
| Machine Model | FY-LCM01 family / custom semi-enclosed configuration |
|---|---|
| Laser Type | Fiber laser |
| Available Laser Power | Selected after enclosure and process review |
| Laser Source | Confirmed in the final configuration |
| Working Area | Configurable for the application |
| X / Y Axis Travel | Confirmed in the final configuration |
| Positioning Accuracy | Defined by bed size, drive system and acceptance conditions |
| Repeat Positioning Accuracy | Defined by bed size, drive system and acceptance conditions |
| Maximum Travel Speed | Defined by bed size, drive system and acceptance conditions |
| Maximum Acceleration | Confirmed in the final configuration |
| Cutting Thickness | Depends on power, material and cutting process |
| Cutting Materials | Suitable metals after material and process review |
| Laser Cutting Head | Confirmed in the final configuration |
| CNC Control System | Confirmed in the final configuration |
| Servo Motor | Confirmed in the final configuration |
| Linear Guide Rail | Confirmed in the final configuration |
| Rack & Pinion | Confirmed in the final configuration |
| Reducer | Confirmed in the final configuration |
| Water Chiller | Confirmed in the final configuration |
| Assist Gas | Nitrogen, oxygen or prepared compressed air, according to process |
| Electrical Supply | Confirmed in the final configuration |
| Total Connected Load | Confirmed in the final configuration |
| Machine Dimensions | Confirmed in the final configuration |
| Packing Dimensions | Confirmed in the final configuration |
| Net Weight | Confirmed in the final configuration |
| Gross Weight | Confirmed in the final configuration |
| Machine Bed | Welded steel structure; layout depends on selected working area |
Related equipment
Compare the formats
04 / Downloads
Planning resources
Download the fiber laser cutting selection guideEnglish document · 91 KB↓Before you enquire
Is it equivalent to a fully enclosed machine?+
No. Partial panels must not be presented as equivalent protection; the complete design and remaining access require assessment.
Can the enclosure follow our loading method?+
Provide sheet dimensions, handling equipment and available space so a feasible access concept can be reviewed.
Is the semi-enclosed configuration ready to order?+
No. Final design, model designation, components and availability require engineering confirmation and an agreed quotation.
05 / Discuss my application
Tell us what you need.
Describe your material, sheet handling and the reason for considering a partial enclosure. Mention the FY-LCM01 semi-enclosed project and include a workshop layout.
Selected machineFY-LCM01
FY-LCM01
Tell us what you need.
Continue on our contact page to share your application and request a configuration.
Discuss my application ↗