Small components and fixtures
Review the complete part setup, including fixture height and loading clearance, against the chamber drawing.
FY-LMM02-CA defined chamber.
A defined chamber.
A setup matched to your parts.
Bring repeatable bench work into an enclosed desktop format. FY-LMM02-C is selected around chamber fit, loading access and the required mark, with a documented fiber reference configuration to support the initial discussion.
Reference source20 W or 30 W fiber
Reference field110 × 110 mm
PlatformEnclosed desktop workstation
LMM02-C
FY-LMM02-C enclosed desktop platform. Confirm the supplied configuration in the quotation.
01 / FY-LMM02-C
Machine & details
Confirm the final equipment and configuration in the quotation.
Repeatable identification
Evaluate text, logos, serials or codes on representative production material, with clear contrast and readability criteria.
Controlled bench workflow
Coordinate positioning, door operation, extraction and inspection within a defined manually loaded workstation.
02 / Selection guide
Choose around your application
Match the equipment to the material, part and production workflow.
01 / COMPLETE PART FIT
Look beyond the marking field.
The reference field describes lens coverage. The chamber, door opening and working distance determine whether the complete part and fixture can be used comfortably.
- Maximum workpiece and fixture envelope
- Loading opening and door clearance
- Lens position with the part in place
Is 110 × 110 mm the maximum workpiece size?
Discuss my application ↗No. It is the reference marking field. Check the full setup against the chamber drawing, access opening and lens working distance.
FY-LMM02-C enclosed desktop platform. Confirm the supplied configuration in the quotation.
02 / REFERENCE CONFIGURATION
Compare 20 W and 30 W on the required result.
The documented reference uses a fiber source. Material, mark size, filled area and the required finish determine which proposed configuration deserves a sample trial.
- Production alloy, coating or plastic formulation
- Smallest feature and contrast target
- Complete cycle including door operation
Will the higher power option always be better?
Discuss my application ↗Rated power alone does not establish quality or output. Compare approved samples and complete operating cycles using the exact proposed source and lens.
FY-LMM02-C enclosed desktop platform. Confirm the supplied configuration in the quotation.
03 / INSTALLATION
Confirm the supplied workstation as a whole.
Treat the enclosure, controls, optics and extraction as one installation. Identify what is included and what the site must provide before the machine is ordered.
- Access controls and viewing window
- Extraction and electrical connection
- Computer, software and fixture scope
Does the enclosure confirm a safety class?
Discuss my application ↗No. Review the complete guarding and access-control specification, viewing-window details and relevant documentation for the supplied machine.
FY-LMM02-C enclosed desktop platform. Confirm the supplied configuration in the quotation.
03 / Configuration
Configuration & supply scope
Confirm the final equipment and configuration in the quotation.
| Machine format | Enclosed desktop workstation |
|---|---|
| Reference laser | 20 W or 30 W fiber; 1064 nm |
| Reference source options | Max or Raycus; confirm exact source model |
| Reference marking field | 110 × 110 mm; confirm fitted lens and usable area |
| Reference cooling / software | Air cooling / EZCAD |
| Reference dimensions / weight | 800 × 450 × 750 mm / approx. 52 kg |
| Part / fixture envelope | Confirm chamber drawing, door access and working distance |
| Acceptance / supplied scope | Agree sample, full cycle, utilities and included equipment |
More published configuration details
FY-LMM02-C reference configuration
These values describe the documented 20/30 W fiber reference configuration. They are a basis for discussion; the quotation and approved configuration define the supplied machine.
Compare laser technologies or request the current configuration sheet .
The enclosure alone does not establish a laser safety classification or a specific compliance status. Confirm the complete guarding, access-control, viewing and extraction arrangement for the selected machine and destination.
| Item | Reference / confirmation needed |
|---|---|
| Platform | Enclosed desktop laser marking machine |
| Laser power options | 20 W or 30 W fiber reference options |
| Laser source | Max or Raycus reference options; confirm the exact source model |
| Wavelength | 1064 nm for the documented fiber configuration |
| Marking field | 110 × 110 mm reference field; confirm the fitted lens and usable area |
| Cooling / software | Air cooling / EZCAD reference control software |
| Reference machine dimensions | 800 × 450 × 750 mm; confirm the installation drawing and service clearance |
| Reference net weight | Approx. 52 kg; confirm the supplied configuration |
| Workpiece and fixture envelope | Confirm the chamber drawing, door opening, fixture and working distance using your largest part |
| Marking result / cycle time | Verify on representative material with the required artwork, contrast or depth and complete loading cycle |
FY-LMM02 or FY-LMM02-C?
Choose by loading access and the complete workpiece setup. An enclosure is a mechanical difference; it does not by itself make marking faster, deeper or more precise.
View the open FY-LMM02 · Compare all marking platforms
| Selection point | FY-LMM02 | FY-LMM02-C |
|---|---|---|
| Machine format | Open desktop all-in-one | Enclosed desktop workstation |
| Loading access | Open access around the marking position | Load through the enclosure opening; check door and fixture clearance |
| Part suitability | Review when varied part shapes need flexible access | Review when the complete part and fixture fit inside the chamber |
| Rotary attachment | Confirm attachment, workpiece dimensions and software compatibility | Also verify chamber clearance, rotation and loading path |
| Source and lens | Confirm the quoted configuration against the material | 20/30 W fiber and 110 × 110 mm field are the documented reference |
| Process acceptance | Approve representative samples, code readability where relevant, positioning and the full operating cycle for either platform. |
Related equipment
Compare the formats
Before you enquire
Can it mark every plastic?+
No universal material suitability is stated. Test the exact formulation, colour, additives and surface finish against the required result.
Can a rotary attachment fit inside?+
Review it with the complete part and fixture. Confirm rotation clearance, lens position, loading path and software support.
When is the open FY-LMM02 worth considering?+
Compare the open format when varied part shapes or fixture changes need more loading access. Approve the process and protective arrangement for either platform.
05 / Discuss my application
Tell us what you need.
Send material, maximum part dimensions, fixture details and artwork. Add the required result, quantity, target cycle and destination power supply to compare an FY-LMM02-C configuration.
Selected machineFY-LMM02-C
FY-LMM02-C
Tell us what you need.
Continue on our contact page to share your application and request a configuration.
Discuss my application ↗